Saturday, August 24, 2019

Energy and Metabolism, Nutrition, and the Digestive System (Synopsis) Essay

Energy and Metabolism, Nutrition, and the Digestive System (Synopsis) - Essay Example These compounds are further subdivided into many classes such as Carbohydrates into monosaccharides and polysaccharides, Proteins into amino acids and lipids into triglycerides and fatty acids (Saturated and Unsaturated). All these compounds which form the basic requirements of our body and food contribute in the process of formation of ATP, the basic energy providing compound of our body. These biochemical compounds when enter our digestive system are further broken down into their very basic compound or particle which then undergoes the process of metabolism (either anabolism or catabolism) to form ATP. Our digestive system consists of oral cavity where food is chewed, esophagus for the transfer of chewed food, stomach for the breaking down and absorption of some of the food specially Vitamin B12 and proteins and intestines (small and large) for the further absorption and digestion of remaining undigested food and removal of left over undigested food through the anal canal. All the se systems form the basis of body’s energy providing system along with liver where most of the absorbed compounds are taken and there they undergo the process of metabolism to form the basic energy providing compound of the body. An abnormality in any of them e.g. hepatitis, peptic ulcers could lead to less nutrition supplied to the body ( malnutrition) and even

Friday, August 23, 2019

Literature critique Essay Example | Topics and Well Written Essays - 1000 words

Literature critique - Essay Example authors get across that the failure to communicate has been shown to be at the root of 60% of events reported to the Joint Commission on Accreditation of Healthcare Organization. Reports from coroners also suggest that error in communication tends to lead to the death of a patient. The title gets straight to the point, informing the audience of the importance of the study. There are ten authors, three as observers, three as analysts, and the other four had roles that were not obvious. The abstract provides the reader with the background, methods, and results of the study. They state a clear objective, nevertheless a rationale is not given at this stage. Also supplied is an overview and summary of the results. The authors have provided a short informative and understandable background of the topic supported by evidences and statistics, including literature and ethnographic findings suggest that the current weaknesses in communication in the operating room may derive form a lack of standardization and team integration. The writers anticipate that a carefully adapted checklist system could promote safer, more effective communication in the operation room team. The literature review was merely a summary, not a review. The aim of the study was to define common communication failures. Some details of participating in the study were included along with an explanation of the data collected, the methods used to record data as well as the procedures for data analysis. According to Taylor and Bodgan (1998) the research design in this study was clearly appropriate to address the research aims. The researchers provide enough details regarding ethical issues. They made it clear that they had taken the necessary approval from the ethical board of the hospital. According to Silverman (2001), ethical issues come first before many other factors in studying subjects on humans. The researchers have explained that 94 team members participated from anesthesia, surgery, and nursing

The different and similarities the ideological position by the main Essay

The different and similarities the ideological position by the main candidates in the city of Toronto election for Mayor (2014) - Essay Example He proposed that they shall be kept below the rate of inflation to reduce the cost of owning residential property. On the other hand, he proposes a steeper increase of commercial taxes as compared to residential property so as to reduce the ratio between commercial taxes and residential taxes (Peat 2014). Olivia chow another favorite contestant intended to keep the tax rates of residential property pegged on the rate of inflation such that they are either slightly higher, lower or in line as compared to the increases or decreases in the inflation rates. Her policies on property tax favor small businessmen as she intended to decrease the rates of taxes for these businesses by a total of 2.5% by the year 2020 (Peat 2014). This she believed would service as an incentive for more people to join the market. Just like his fellow contestants for the seat John, Doug Ford promised to ensure that the residential property taxes are maintained at a level below the comparative fluctuations of the rate of inflation (Peat 2014). All the three main candidates aimed to reduce the amount of taxes that residential property pay to make them more affordable to home owners and tenants. John Tory and Doug Ford planed to adopt the exact same policy of keeping the rates lower than the comparative rate of inflation at any given time. The Policies of Olivia chow are almost similar in that she also intended to use the inflation rate at the yardstick to determine the rate of tax for residential property (Peat 2014). The only difference is that she did not promise to keep increases in the rates strictly below the relative increases in inflation rates. She said the changes in the rate could be above or below the changes on the rate of inflation but by a very small margin (Peat 2014). Another difference in Olivia`s policies manifested in her plans for boosting small businesses by progressively decreasing the taxes required from them (toronto mayoral election promise tracker

Thursday, August 22, 2019

Nature of Communities Essay Example for Free

Nature of Communities Essay At the beginning of the 20th century there was much debate about the nature of communities. The driving question was whether the community was a self-organized system of co-occurring species or simply a haphazard collection of populations with minimal functional integration (Verhoef, 2010). Krebs (1972) described a community as an assemblage of populations of living organisms in a prescribed area or habitat. However, according to Wright (1984), the working definitions of community can be divided into two basic categories: organismic or individualistic. The organismic approach contends that communities have discrete boundaries and that the sum of the species in an area behaves as organism with both structure and function. In contrast, the individualistic concept regards communities as collections of species requiring similar environmental conditions (Wright, 1984). A)Organismic versus individualistic distribution Solomon (2005) stated that the nature of communities is discussed based on two traditional views which are Clements’s organismic model and Gleason’s individualistic model. The organismic model views community as a superorganism that goes through certain stages of development (succession) toward adulthood (climax). In this view, biological interactions are primarily responsible for species composition, and organisms are highly interdependent. In contrast, according to individualistic model, abiotic environmental factors are the primary determinants of species composition in a community, and organisms are largely interdependent on each other. According to organismic concept it is expected that an entire community or biome will respond as a unit and to relocate as climatic conditions change. Pleistocene biome migration in response to multiple glaciations, the accordian effect, is a classic example of this model (Wright, 1984). In contrast, Wright (1984) further explained that the individualist expects each species experiencing similar climatic changes to respond independently and thus, the community composition of an area to change via both immigration and emigration of some individual taxa while others remain in the area. Communities are not stable under this model but recognize in response to changing local conditions. According to Clements’ organismic hypothesis, species that typically occupy the same communities should always occur together. Thus, their distributions along the gradient would be clustered in discrete groups with sharp boundaries between groups (Russell et al., 2011). In the 1920s, ecologists; Frederic Clements and Henry A. Gleason developed two extreme hypotheses about the nature of ecological communities (Russell et al., 2011). Clements championed an interactive (organismic) view describing communities as â€Å"superorganism† assemblages of species bound together by complex population interactions. According to this view, each species in a community requires interactions with a set of ecologically different species, just as every cell in an organism requires services that other types of cells provide. In contrast, Gleason proposed an alternative, individualistic view of ecological communities. He believed that population interactions do not always determine species composition. Instead, a community is just an assemblage of species that are individually adapted to similar environmental conditions.According to Gleason’s hypothesis, communities do not achieve equilibrium; rather, they constantly change in response to disturbance and environmental variation. According to Gleason’s individualistic hypothesis, each species is distributed over the section of an environmental gradient to which it is adapted. Different species would have unique distributions, and species composition would change continuously along the gradient. In other words, communities would not be separated by sharp boundaries. B)Stochastic Versus Equilibrium Schools The stochastic school believes that most communities exist in a state of equilibrium, where competitive exclusion principle is prevented by periodic population reductions and environmental fluctuations (Crawley, 1997). More generally, stochastic effects can cause a population to shift from one type of dynamic behavior to another (Turchin, 2003). In addition, stochastic school maintains that physical and temporal factors are dominant influences of community composition. This view argues that species abundance varies and is largely determined by differential responses to unpredictable environmental changes (Levin, 2009). In contrast, the equilibrium explanations assume that community composition represents the stable outcome of interspecific interactions (set of species abundances reached when the rates of change in population is zero) and also assume that the community will return to an equilibrium after those populations are perturbed (Verhoef, 2010). For instance, the traditional equilibrium model assumes that the probability of an individual fish larva surviving to reproduce is limited in a density-dependent manner by the abundance of the adult fish. Alternatively, stochastic model predicts that recruitment to the adult phase is independent of the density of the adults (Chapman et al., 1999). Equilibrium model states that species richness is entirely determined by ongoing immigration and extinction (Kricher, 2011). Therefore, equilibrium model can be said to be deterministic process which is important in shaping community structure through competition and predation on native species over short temporal scales (Thorp et al., 2008). For example, Chapman et al., (1999), stated that coral reefs communities are at equilibrium showing precise resource partitioning in response to the competition between the various fish species. However, in contrast, the community may also be more susceptible to stochastic processes. For example, the number of fish species on coral reefs is kept high largely by stochastic processes. According to Naiman et al., (2001), stochastic processes are unpredictable and operate in a relatively density-independent fashion. This is the opposite of the traditional, equilibrium hypothesis which emphasizes density dependent competition between species.

Wednesday, August 21, 2019

Communication Within Unilever Plc

Communication Within Unilever Plc 1.1 Introduction and background of research This research is based on the topic How the channels of communication with employees might be improved in a multinational organization. Unilever PLC is a leading multinational in Fast Moving Consumer Goods sector and it operates over hundred of countries worldwide. Unilever maintains its leading edge by establishing superior standards, latest managerial systems and state of art technology. Most importantly the main focus of Unilever business is to run in profitable manner while complying with statutory and legal requirements in to the maximum extent, in each and every place it operates. Unilever is therefore highly concerns about implementation of latest and successful managerial systems in its production plants in very first time it is possible. Moreover Unilever contributes for developing these systems to match with company requirements and hence most of managerial systems that Unilever implemented are quite superior to others and can easily be differentiated from managerial systems of its competitors. Product Range of Unilever PLC is Home and personnel care, Margarines, fat spreads, Tea and supplementary food products. There are 400 brands and 14 categories of home, personal care and foods products, no other company touches so many peoples lives in so many different ways. Unilevers brand portfolio has made them leaders in every field in which they work. Knorr, Lipton, Dove Omo are some examples for trusted brands. In the Sri Lankan context Unilever could pass by all its competitors and to make its all brands to be the flag ships. At the moment Unilever Sri Lanka Limited owns twenty two global brands which are very much familiar to Sri Lankans as things touching their hearts. Lux, Sunsilk, Signal, Astra and Lifebuoy are some of those popular brands. Brand communication can be a powerful force for behavior change. They have the opportunity to promote healthy lifestyles among our millions of consumers. At the same time they have a duty to market their products responsibly and provide their consumers with clear and simple information about the products they make and how they can fit into a healthy and balanced diet. This depends on effective communication. As a multinational company that has been created a very good brand loyalty in consumers mind they will have to satisfy their customer requirements to the maximum level. In order to do this Unilever will have to adopt according to the changes in customer requirements. As the market grows rapidly new products from competitors are coming to the market frequently. For their survival they will have to produce new ranges of products and to do modifications for their existing products as customer requirements are changing rapidly. To do these kinds of Modifications Companys communication process and communication channels should be of high quality. Quick decisions will have to be made; for that employees will have to send their messages and information faster and get feedback very quickly. For this purpose the company uses many methods (channels). Since this is a global company their companies are scattered all over the world. Therefore there should be a strong communication network within each and every company. Unilever PLC uses strategies and guidelines to give directions for employees. As a result the employees would have a clear idea of what the company is expected from them; they would know what their duties and responsibilities are. Then they will be motivated as their duties are being simplified and specified. This will create efficient employees and would be resulted in productivity increase. Through strategies and guidelines more detailed information can be provided to employees. More and specific information gives subordinates a feeling of confidence and security; lack of information promotes insecurity and a feeling of not being trusted. By doing this they are able to get maximum out of employees. This organization gets ideas and views of employees about the policies and procedures being applied by the company. It would help the top management to identify their weaknesses and take necessary actions to revise their policies and procedures. Unilever has put a great effort to engage wit employees to find out whether they understand the companys vision and role that is being expected from them. The company gets ideas from employees to know what their perception on the changes the company has to do to achieve their ambitions. In 2009 Unilever began an employee engagement programme that will ensure employees are involved in Unilevers vision and plans for the future. Uniliver gather feedback from employees through regular employee engagement surveys. A Global People Survey (GPS) of all Unilever employees is conducted every two to three years. Unilevers management population is also invited to participate in a refined version of the survey GPS-Pulse, which is conducted at six-monthly intervals in the years when GPS is not taking place. The GPS-Pulse conducted in September 200 highlighted that people are proud to work for Unilever and feel good about the culture and business. Results also showed increased confidence in leader ship and the direction that the company is taking. Feedback also has pointed to areas where the company needed to do better and these were actioned by the Unilever Executive and their senior leaders. Through these kinds of strategies employees will feel that theyre being valued and recognized by the company and they will be motivated to work hard to achieve objectives of the company. Being a multinational organization Unilever PLC uses telephones to communicate with their peers. They have the ability to exchange their ideas over the phone and to get the feedback of the other party. Exchanging messages over the phone would fasten the decision making process and it will affect their smooth operation positively. Letters, memos and e-mails are anther methods of communication used by Unilever PLC. Since these are written communication channels they will help employees to get clear idea by reading them. If there is a long list of directions to be given to employees these channels would be more effective as they are in writing. Since everything is in writing it will be easy for them to comply with these requirements. Research Objectives and Hypothesis The completion of this research intends to achieve the following objectives in relation to Unilever PLC. To identify the channels of communication used by the Organization To study how to improve the channels of communication with employees of the organization. To find possible strengths and weaknesses in communication channels currently being used by the company. To suggest methods to avoid current weaknesses in communication channels. Hypothesis Finding how the channels of communication with employees might be improved in a multinational organization is the objective of this research. Accordingly, hypothesis of the research is defined as below, H0: The channels of communication with employees in existence within the organization are adequate. H1: The channels of communication with employees in existence within the organization are not adequate. Research Scope For this research qualitative research techniques have to be used. Since this is a qualitative one it is difficult to set standard guidelines to identify whether the organizations current communication channels are suitable or not. This should be done compared to another organization. It would be difficult to select a suitable benchmark. When carrying out a research feedback should be taken from employees at different levels such as managers and lower level employees in a way that covers the entire organization. Since their ideas are different the results cannot be generalized. LITERATURE REVIEW Introduction to Literature Review The research literature review is based the theories and researches previously done by scholars. These should be applied in the research. Clearly defined research problem and research methods have to be included. Review of Relevant Theories and Literature A typical day for a manager includes doing desk work attending scheduled meetings , placing and receiving telephone calls, reading and answering correspondence , attending unscheduled meetings and tours. Most of these activities involves communication. In fact, managers usually spend more than half of their time communicating in some way. Communication always involves two or more persons , so other behavioral process such as motivation, leadership and group and team processes all come into play. Top executives must handle communication effectively if they are to be true leader. Communication is concerned with the making of meaning and the exchange of understanding. One model of communication considers it from the perspective of transmitting information from one person to another. Communication is very important for all kinds of business organization. According to researches carried out by many authors, communication and communication channels play a very important role in any business organization. Different people have carried out researches relating to communication and efficiency of communication channels. Few examples are as follows; A web article defines a communication channel as, Medium through which a message is transmitted to its intended audience, such as print media or broadcast (electronic) media. As per Quincy Wright, Communication channels can be understood simply as the modes or pathways through which two parties might communicate. As population grows and technology evolves accordingly, these channels of communication change as well. (A Study of War, 1967) According to a web article, In the basic communication process, a sender puts a message in words and transmits it to a receiver who interprets the message. The medium the sender chooses to transmit the message is called the communication channel. There are many communication channels being used by different organizations. Some of these are universally familiar methods where as some of them are specific to certain organizations. Listed below are few methods among them. Letters/ memos/ reports Although there is an increase in the usage of electronic communication, most people seem to receive their messages on paper. This may be because there is no e-mail link between the parties, because a hard copy is required to meet audit or legal requirements or because the recipient feels more comfortable to read from paper than from a screen. Manuals This is also a paper document and the main purpose of this is reference. Fax This method uses public telephones to deliver documents from one place to another. In this method original hard copy is not sent to the receiver. E-mail This is a very efficient method of communicating where whole documents can be sent through internet. This provides many cost advantages when compared to telephones and other paper based communication methods. Intranet This method is also same as the internet method, but this used to deliver documents, images and so on within an organization. In this method also information is much less expensive to distribute and maintain when compared to paper based communication methods. Meetings Two or more people get together and carryout discussions related to different areas to take decisions or to solve problems. This is a verbal communication method where the feedback will be received at the same time. Telephone This is a two way communication method. It is now possible to reach people practically anytime, anywhere over the phone. Video conferencing Under video conferencing system phone lines are used to transmit video and sound between two or more parties. Real time video conferences can be conducted when parties participated to the meeting are in remote locations. Communication is the process of transmitting information from one person to another. Effective communication is the process of sending a message in such a way that the message received is as close in meaning as possible to the message intended. Effective communication is based on the ideas of meaning and consistency of meaning. Meaning is the idea that the individual who initiates the communication exchange wishes to convey. Communication also relates directly to the basic management functions of planning, organizing, leading, and controlling. Environmental scanning, integrating planning-time horizons, and decision making for example, all necessitate communication. Delegation, coordination, and organization change and development also entail communication. Communication is essential to establishing standards, monitoring performance and taking corrective actions as a part of control. Clearly, then, communication is a pervasive part of virtually all managerial activities. The Communication Process As figure shows, noise can disrupt the communication process at any step. Managers must therefore understand that a conversation in the next office, a fax machine out of paper and the receivers worries may all thwart the managers best attempts to communicate. Sender Firm that sends the message. Message What is being transmitted from sender to receiver. Encoding Message translated into appropriate meaning. This is the process through which the message is symbolized. Channel The medium through which the message is being sent. Decoding Process that translate the message and generating the meaning out of it. Receiver Firm that receives the message. Feedback Process by which the receiver sends his responds to the sender. Interpersonal communication focuses on communication among people at work. Two important forms of interpersonal communication, oral and written, both offer unique advantages and disadvantages. Thus the manager should weigh the pros and cons of each when choosing a medium for communication. Communication channels play a vital role in communication. Messages are conveyed through channels. Telephone, videoconferencing, face-to-face meetings are some examples for verbal communication, where as letters, memos, e-mails, reports are some examples for written communication. Channel should be selected based on the nature of the message or the information that is being transmitted or exchanged. Different channels have their respective strengths and weaknesses. For example, it would be ineffective to give a long list of directions verbally. There are a variety of forms of organizational communication. Vertical communication between superiors and subordinates may flow upwards or downwards. Horizontal communication involves peers and colleagues at the same level in the organization. Organizations also use information systems to manage communication. Electronic communication is likely to have a profound effect on managerial and organizational communicational in the years to come. A great deal of informal communication also occurs in organizations. Communication networks are recurring patterns of communication among members of a group. The grapevine is the informal communication network among people in an organization. Management by wandering around is also a popular informal method of communication. Nonverbal communication includes facial expressions, body movements, physical contact, gestures and inflection and tone. Managing the communication process necessitates recognizing the barriers to effective communication and understanding how to overcome them. Barriers can be identified at both the individual and organizational levels. Likewise, both individual and organizational skills can be developed to overcome these barriers. Barriers to effective Communication, Individual barriers Conflicting or inconsistent cues Credibility about the subject Reluctance to communicate Poor listening skills Predispositions about the subject Organizational Barriers Semantics Status or power differences Different perceptions Noise Overload Overcoming barriers to communication Individual skills Develop good listening skill Encourage two way communication Be aware of language and meaning Maintain creditability Be sensitive to receivers perspective Be sensitive to senders perspective Organizational skills Follow up Regulate information flows Understand the richness of media (R.W.Griffin, 1997) CHAPTER 3 METHODOLOGY Research Methods Servey reserch methods to collectting data as investigate the employees and organization need. Research Approach There are few steps to be followed. They are as follows; Problem Identification /Hypothesis Identify the existing channels and channels to be introduced. Research Design and planning This is a Prepare Queries, Prepare the project plan, Prepare the research team work plan, Prepare the Physical resource and conduct with the service providers in communication channel providers wise. Data collection and Data Review and analysis theory After having identified the variables to be studied and operationally defined them a researcher is expected to adopt a suitable method of data collection to measure the variables and their relationships. Following are the methodologies that are used to this research, Questionnaire survey Interviews Observation Case study In the case of a questionnaire based survey or interviews, the unit of analysis is the individual as the individuals included in a sample are expected to provide information by responding to the survey questionnaire or the questions posed to them at the interview. In the observation method there is no single unit of analysis as the researcher is expected to observe real life situations , a process , an event or a series of event over a period of time. The unit of analysis in the case study method could cover a community, an organization, a group or a selected individuals . For instance, one can study the performance of one or more organizations and arrive at meaningful conclusions about the practice of the management. Similarly can study in depth the leadership style of several CEOs and arrive at meaningful conclusions about organizational leaderships. The Questionnaire Survey In this research questionnaire based survey ahs become one of the most widely used techniques of data collection for reasons such as economy , ability to reach a larger sample of the population, saving of time , feasibility to collect data within a predetermined framework and feasibility to process the data using a coding system that could be easily used on computers. Although the questionnaire method has its inherent limitations this method has been adopted to study qualitative aspects such as attitudes and values as well as quantitative aspects of behaviour. The forms of questions included in a questionnaire depends on the kind of information required . Although the forms of the questions may differ in a variety of ways,questions are presented in two basic types; Open ended Structured Open ended questions There are several advantages of open ended questions if the researcher is interested in probing deep into a particular issue such as motivation, job satisfaction, etc. There are some limitations inherent in open ended questions. These include, Difficulty in recording lengthy answers, particularly when the respondents interest is aroused by the researcher through probing, difficulty in asking more than two questions as the answer may take both time as well as space in the questionnaire , and relatively high degree of reliance on the researchers own judgment as to what he thinks is the meaning of the answers given to open ended questions. Despite these limitations open ended questions are used by researcher when the questionnaire based interview method is adopted because an experienced researcher can always exploit the advantages associated with open ended questions. Structured questions This presents the respondent with fixed response alternatives. That is question is worded in such a manner as to induce the respondent to answer by making a choice between two or more alternatives. Advantage-easy to administer in the field because they are pre-coded. Interviews Is a method of collecting data by speaking to someone who is often not known to the researcher previously. Thus it would involve a considerable amount of interpersonal skills on the part of the researcher to establish a relationship with the person being interviewed and elicit the required information within a limited period of time. There are two basic types of interviews, Structured and unstructured. Observation Method Is a technique adopted highly in qualitative research to study natural behaviour. Thus observation involves making judgments about the occurrence of behaviour , its frequency, its duration or its latency. These measures are the basic data used to describe the naturally occurring behaviour or to assess the effects of such behaviour. Therefore the collection of the data through observation has to be done carefully in order to ensure accuracy ,reliability and objectively. There are two broad methods of observing behaviour: participant and non participant. Case study Method This involves studding individual cases in their natural environment over a period of time. One who uses a case study method may adopt different methods of data collection and analysis. These methods may be either qualitative or quantitative or a combination of both. Research Strategy Selecting the most suitable channels to the company. For this purpose number of channels should be investigated. Sampling Techniques Select a sample size based on the company size that covers all areas and all levels of employees. Data Collection Tools High quality data should be collected.. Data Analysis Methods Methods such as pie charts, tables, decision trees, scatter diagrams and so on can be used to analyze data. Presentation of Data Data should be presented using a report and a multimedia presentation. Research Limitations This research is focusing only on the communication channels. Communication process and their reliability is being ignored. Ethical implications of this research If the employees provide wrong information the whole research is misleading. Research Schedule Depending on the nature and activities of the research a time schedule should to be prepared. Conclusions This research is based on the topic How the channels of communication with employees might be improved in a multinational organization. Existing channels and new channels to be introduced should be addressed. For this purpose research topic should be defined and background to the research has to be explained. Theories relevant to the research should be applied under literature review. Finally ethical issues that can be raised during the research should be addressed and the decision is taken based on employees perceptions. The study covers a wide area on the communication channels and based on the evaluation of how to improve the communication of the employees, new communication channels to be introduced must be taken into consideration, the necessary channels that should be improved according to improve the methods of communication in the organization. Under this research based on the multi national company we can learn and can get more knowledge as managers, how to manage effective communication in a multi national company, can feel the employees communication and how to control the whole communication process in a successful and effective manner in the organization.

Tuesday, August 20, 2019

Measurement Software in Construction

Measurement Software in Construction 3.1 Introduction The use of measurement software in construction industry has focused on measurement and BQ since these two have been the predominant core activities of work. However, as we are aware today, the use of computers can be applied to many different situations. This chapter will review the application and features of measurement software in local construction companies. The common application functions of measurement software such as measurement, cost estimation, tender document preparation, BQ preparation and the like will briefly described in the first sub-chapter. In addition, case studies of measurement software currently available in market whether local or foreign will be conducted in this chapter. This chapter will also provide the key features or modules of the Microsoft Office Excel 2007, CATO Suite, BinaLink, Buildsoft, WinQS, PriMus-DCF and PriMus REVOLUTION in more details. The positive or negative impacts of measurement software on local construction industry will be explained and carried out by few survey analyses additionally. A summary of this chapter will be presented in the last section. Questionnaire will be drafted based on this chapter to meet the last two objectives of the research which are the extent of measurement software application and the resulted impacts from it in local construction companies. 3.2 Application and Features of Measurement Software in Local Construction Companies Measurement software were created and developed to serves the roles and responsibilities of QS profession in a construction companies with lesser time and higher accuracy. Application functions of measurement software enable to perform the following: Measurement Measurement is the main activity that any quantity surveyor engages in during the stage of tender preparation. Curren (1987) advocates that computer can measure quantities automatically and is more accurate compared to measurement done manually (cited by Lim and Ong, 2008). This goes to show the use of computers is vital to the quantity surveyor as it helps in reducing the time needed for taking-off quantities. Cost Estimation Ahuja and Campbell (1988) defined that cost estimation is prediction of probable cost incurred for a proposed construction project. It is a technical process and has been described as both an art and also science. Estimating is usually carried out by quantity surveyor or estimator on behalf of contractor with the attempt to forecast the tender sum to be included in the BQ before submitting the tender. The purpose of the cost estimation is to obtain the expected cost of a project in varying degrees of accuracy at different phases of project. Cost estimating software will enhance the accuracy while estimating the building cost and examine the implication of initial cost design. BQ Preparation Computer systems are used to facilitate this process by automatically reducing double keying work and thus saving a huge amount of time. In term of BQ production, Microsoft Excel is widely used for doing taking off and preparation of BQ. Traditional spreadsheet measurement sheet have the ability to reduce the burden of timesing and squaring as well as checking of this two steps (Hamid and Chong, n.d.). BQ production involves a long and tedious process. Nigel (1978) has listed out eight major steps in producing a BQ as below: Measurement of Quantities Timesing and Squaring Checking of Timesing and Squaring Abstracting Checking of Abstracting Preparation and Checking of Draft BQ Preparation of BQ and Checking Final BQ Tender Documents Preparation The phase of preparation of the tender documents is extremely important, as it determines the terms of the tender procedure as well as the terms for execution of the contract. Kovari (n.d.) noted that seven documents will be provided in tender documents preparation and the format of it can be saved into the memory of the computers as shown below: Advertisement for Bids (Notice to Contractors or Invitation to Bid) Draft Contract which included type of contract, general provisions or general conditions and special provisions or special provisions. Statements of Work, Services and Technical Specifications BQ Schedule of Execution Bidding Schedule Approved Drawings Project Cost Control Cost control starts at inception, when guide prices or indicative costs will be required through the stage when an early price estimate is prepared and the tender process undertaken by the contractors through the final completion and agreements of the final account for the project. The architect or engineer will want to consider alternative solutions that meet the clients overall aims and objectives during the various stages of design. The quantity surveyor will offer cost advice for the comparative design solutions of the alternative materials to be used and also advice on the cost implications of the design morphology and procurement. Cost control does not stop at tender stage but continues up to the agreement of the final account and the issue of the final certificate for the works. Hence, cash flow estimating software enables quantity surveyor record and calculates the date driven accurately and faster. It is also providing a better monitoring on the building process (Ashworth an d Hogg, eds, 2007). Valuation In practice, the contract normally is to be paid by employed a sum on account as the construction work proceeds. Before the Architect issuing a certificate, quantity surveyor has to prepare an interim valuation (Lian, 2009). Interim valuation can be carried out by using the BQ programme as database usually. The main items to be considered when valuing the words area as following: Preliminaries Main Contractors Works Variation Unfixed Materials and Goods Statutory Fees and Charges Nominated Sub-Contractors Works Nominated Suppliers Goods Fluctuation in Costs of Labour, Materials Retention Final Account Preparation According to Ashworth and Hogg (eds, 2007), the majority of construction projects result in a final cost that is different to that agreed by the client and contractor at commencement of the construction works. The calculation and agreement of this final construction cost, the final account is usually of the utmost importance to both the employer and contractor. Therefore, parties to the contract need to ensure that the final account incorporates a fair valuation of the works carried out. Within lump sum contract arrangements the price agreed by the client at commencement will normally require adjustment for several matters including variations, provisional measurements, provisional sums, fluctuations, and claims. Thus, quantity application software will sort, store and analyse the capability and score the goal of time saving. 3.3 Case Studies of Measurement Software Available in Market Anything and everything can be computerised nowadays. It is inevitable that the complex task of measuring quantities off drawings or taking-off has now progressed into the digital realm. ICT is becoming a strategic asset for any organisation to deliver business improvement in the AEC industry. Hence, QS firms are encouraged to use the computer to perform traditional tasks. The following are some measurement software currently used in the market. 3.3.1 Microsoft Office Excel 2007 Microsoft Corporation is a software company based in Redmond, Washington. Microsoft is ranked 15th in the worlds top 500 companies and its operating software has driven 93% of the worlds desktop computers since 1991. Microsoft Office software encompassing a suite of e-mail, word-processing, spreadsheet and presentation tools dominates 90% of the market and brings in $9 billion annually as a third of the companys revenue (Corporate Watch UK, 2004). Graduate School (2010) stated that Microsoft Office Excel is a software application that offers three distinct processes for managing data such as spreadsheet, database or graphing. The primary feature, spreadsheet is a number crunching tool allowing for sophisticated calculations such as budgets, finances, inventories or any task that is numerically oriented. The database and graphing functions allow for selecting, retrieving, viewing and charting data that is contained within the spreadsheet mode. According Microsoft Corporation (2010), Microsoft Office Excel 2007 is a powerful and widely used tool that helps people analyses information to make more informed decisions. There are the top 10 ways in which Office Excel 2007 can help users create spreadsheets and analyse, share and manage information more effectively as shown below: Office Excel 2007 features the Microsoft Office Fluent user interface to help users find powerful tools when users need them. Import, organise and explore massive data sets within significantly expanded spreadsheets. Use the completely redesigned charting engine in Office Excel 2007 to communicate users analysis in professional-looking charts. Enjoy improve and powerful support for working with tables. Create and work with interactive PivotTable views with ease. See important trends and find exceptions in users data. Use office Excel 2007 and Excel Services to help share spreadsheets more securely with others. Help ensure users or users organisation work with the most current business information. Reduce the size of spreadsheets and improve damaged file recovery at the same time. Extend users business intelligence investments because Office Excel 2007 provides full support for Microsoft SQL Server Analysis Services. 3.3.2 CATO Suite Causeway Technologies was established in 1998 to provide its customers throughout the United Kingdom with a range of competitive software products and services. It is a fast growing organisation currently employing in the region of 200 people and is the leading software developer for the construction industry. From feasibility through to final account, cost management professionals are faced with ever tighter deadlines in which to deliver accurate cost information (Causeway Technologies Ltd., 2008). The CATO Suite has been developed with the close participation of the profession and provides powerful support to the QS professional. The introduction of CATO Enterprise is an opportunity to implement a step change in their business processes effectively to provide their staff with a QS desktop. The creation of BQ and cost plans in a controlled environment providing information can be relied upon and used to build a database for future projects and importantly reports produced in a consistent manor for clients (Causeway Technologies Ltd., 2008). 14 types of modules of the CATO Suite provide an affordable solution that can be managed and adapted to company requirements are (Brochure of CATO Suite): CATO Full Contract CATO Management Contracts CATO Quickest CATO CADMeasure CATO Earthworks CATO Cost Planning CATO Cashflow CATO Document Register CATO Procurement CATO E-Tendering CATP Project Controls CATO Cost Management CATO Whole Life Costing CATO Rates CADMeasure is a multi-purpose measurement tool that enables users to measure from electronic drawings with unprecedented accuracy. It provides an easy to use CAD based on-screen professional measurement facility, ideal for all types of measurement from the most sophisticated 3-dimensional building object model to the simplest sketch (Brochure of CADMeasure). The features of CADMeasure are: Easy to use through familiar pull down menus, toolbars and dialogues. Local or network versions available with concurrent licensing. Access to all non-editing AutoCAD commands during measurement session. Comprehensive on-line help system. Full Audit trail with automatically annotated drawing record. Suitable for a range of different users including those involved with property, construction, manufacturing, medical and retail sectors. Ability to store and record complete measurement history in line with design changes. Dynamic link between measurement and drawing content. Available both as a standalone solution and for use with existing installations of AutoDesk products including AutoCAD, MAP 3D and Architectural Desktop. Drawing integrity retained. Improved measurement integrity via new XML file format. Supports remote software development for effective multi-user implementation and updates. 3.3.3 BinaLink Bina Link Solutions Sdn. Bhd. is a company formed by Malaysians who are familiar with local standards and procedures with the objective of providing IT solutions to the construction industry. The company founded by experienced personnel of the construction of the construction and IT industry. The company staffs have vast experience working in consultants and contractors environments. They involved themselves in the rapid advancement of computer development and usage in the construction industry in the last two decades. The development of the companys programme is carried out by dynamic and knowledgeable staffs that are conversant with the latest in IT (Bina Link Solutions Sdn. Bhd., 2006). According to brochure of BinaLink, there are 9 types of modules are: BinaLink BQ Module Binalink Tender Module Binalink CAD Measure Binalink Tender Comparison Module Binalink E-Tender Binalink Preliminaries Binalink Worksheets Binalink Progress Payment Module Binalink Final Account Module The BinaLink BQ Module is an exciting innovative system especially developed for use as a superior tool for the preparation of BQ and construction costing. It is developed by Malaysian experts on a familiar Microsoft Windows platform to suit a standalone or networking environment. In addition, it will be unique local working methods and cost effective system (Brochure of BinaLink). The key features of BinaLink BQ Module are: Standard BQ Libraries Mutiple Column BQ up to 3 columns Lump Sum Bills Project Summary Reports Direct Measurement Method 2 Dimensional Worksheet Measurement Formula Worksheet Measurement Rebar Worksheet Measurement Flagging Reports for Sub-total Quantities Resource Reports Built-up Rates with resources, price and resource databases Mark-up Reports Gross Floor Area Measurement for Elemental Cost Analysis CAD Measurement Facilities with Direct Linking to Worksheet (Optional) 3.3.4 Buildsoft Buildsoft is an Australian company with its head office in Sydney. Buildsoft was established in 1985 to develop and market computer software for the building and construction industry. The company staffed by an enthusiastic team with many years of practical experience in the building industry. In Australia, its products became the industry standard and now exported to 20 countries. The company have a select network of accredited overseas distributors and over 5000 worldwide users. Because of this, Universities and TAFE colleges in Australia as well as selected Universities throughout Asia and the United Kingdom are teaching its products as the accepted standard (Builsoft, 2009). Products available are: Offsider Estimating Global Estimating Subbies Comparison On-Screen/Digitizer Take-off Digitizer Board Scale-Link USB Maths Mate Buildsoft Global Estimating is an estimating programme that has been tailored for commercial use in the building and construction industry. BQ or detailed Estimates and Cost Plans will be produced. It designed primarily for use by commercial building contractors and professional quantity surveyors. It is also including features which allow it to be used in other industries where estimating is required. The main features of Buildsoft Global Estimating System are: BQ Composite Rates Libraries for Description Rates Tendering Function Multi-level Mark-up Function Estimating Functions Job Analysis Cost Analysis Quality Analysis Measurement Calculation Sheet Interim Valuation/Progress Claim Tender Comparison System SCP Module Buildsoft Take Off System (BTOS) CAD Measurement Module Buildsoft Online Tendering System (BOLTS) 3.3.5 WinQS Advanced Cost Engineering (AEC) Solutions cc was formed in June 1996. It is involved in the system design, the marketing and the support of the WinQS system which, over ten years has grown to be the most widely used QS system and had more than 3000 licensed systems installed in Southern Africa as well as internationally nowadays. The WinQS software is constantly being upgraded and new modules written to provide solutions for quantity surveyors and contractors. WinQS provides a complete QS system with on-screen take-off dimension, It provides an ease on pricing due to multiple sets of price may be stored for each project and be copied, multiplied and select for use in Bills production, estimating, valuation and others. The system features of WinQS will be shown in Table 3 (WinQS, n.d.). WinQS is a complete QS system for: The Production of BQ Documents The Production of Estimates Documents The Calculation of Monthly Valuations The Cost Analysis of a Project Joint Building Contracts Committee (JBCC) 2000 Certificate Module Contract Price Adjustment Calculations Tender Analysis Financial Review Costs Reports Table 3: The system features of WinQS (WinQS, n.d.) 3.3.6 PriMus-DCF and PriMus REVOLUTION ACCA is the Italian leader in the Building Industry Software. ACCA is a reference point in the field now to covering an unparalleled range of solutions and distributing the programs which are the standard for the industry. Founded in 1989, ACCA grew rapidly thanks to its products, well-known for their usability and their strongly innovative inspiration. This company is ISO 9001:2008 quality management system certified. Therefore, the company structure will ensure to improve constantly the processes and activities meeting customers needs and satisfaction (ACCA software, n.d.). PriMus-DCF is the BQ software for working directly with Internet Explorer. It is more transparent, closer to your natural and ordinary way of working and thinking, and therefore easy to manage with the What You See Is What You Get (WYSIWYG) philosophy. The Document Computation Format (DCF) standard introduces a revolution in the building software world undertaking the basic data sharing concept. Users can easily transmit BQ and estimates documents and everything in users document will be contained in one unique file, no heavier database structures but just a small size compressed file. With PriMus-DCF, everybody can open a DCF document and work on it freely (ACCA software, n.d.). According to ACCA software (n.d.), PriMus REVOLUTION allows integrated development and processing of all estimating or project management documents, updated with the latest regulatory guidelines with the automatic generation of: BQ (forecasts, resulting costs, work variation surveys, final accounting, quantity estimates, requests for proposal, labour incidence estimate, etc.) Measurement Book Accounting Register Cost Summary Work Progress Statement Payment Certificate Steel Reinforcement Bars Requirements Book Price Lists Comparison Table (for work variation surveys, comparison of work progress statements, comparison of multiple design assumptions or proposals, etc.) Weekly Lists of Workers, Equipment and Costs Forms (completion of works, beginning of works, suspensions, resumptions, execution, etc.) History Management 3.4 Impacts of Measurement Software on Local Construction Industry According to the conducted survey of Lim and Ong (2008), the measurement software is still not widely use or fully utilised in measuring quantities for preparation of BQ or other extent usages in local construction industry although most of the companies have it. Based on the feedback from the survey, the common problems associated with measurement software are: The use of such software requires learning and remembering many procedures Lack of flexibility Need to train new staff to use the software Using measurement software to take-off quantity requires the taker-off to perform transferring of raw quantities from one software into another either digitally or manually to produce the quantities in the BQ format as compared to the manual method. Newer technology is being developed that allows seamless transfer of quantities from measurement software to the customised software for the preparation of BQ. However, not all measurement software has the complete package of measuring and BQ production software. Most of the companies which using the measurement software would need to spend money and time to train existing and new staff to use the software before it can be utilised efficiently. The need of training also indicates that the education of quantity surveyors has not focus on this skill, as it has never been required. Nevertheless, a change to the education curriculum is necessary to produce QS graduates that are skilled in using measurement software now. The survey also noted that it is difficult to check the measured quantities if the measurement is done by using measurement software if compared with the manual method. In fact, only staffs that are skilled in using it would be able to check the quantities easily. Besides, the survey also attempted to find out the advantages of measurement software as the following: Higher accuracy Ease in editing the measurement Increase speed of measurement Easy to measure Reduction of Workforce Most of the companies agreed that utilising measurement software in measurement of quantities produces high accuracy. Measurement of quantities directly from digital format drawings removes the need to reproduce drawings on paper. Wheeler (1992) stated that reproduction of drawing on paper will reduce the accuracy of the drawings and measurement scaled from paper will further erode the accuracy (cited by Lim and Ong, 2008). There is also eliminated to mistakes due to human error in reading the dimension off scale rule and recording the dimension on paper or spreadsheet file. Measurement software allows for easy digital editing of quantities measured. This is because it contained function such as block, entity area, copy, paste, delete and undo as any other software that facilitate the editing process. In addition, application of measurement software will increases the speed in measuring quantities as compared to manual method. This is due to the ability of the software to generate quantities. Memory of computer also enables a program of instruction saved and turns it into fully automatic, it then simplifying the works. Finally, workforce required to measure quantities could be reduced with the use of measurement software. Most QS firms have reduced the number of technical assistants specialising only in measurement of quantities in common practice. With the use of technology, the measurement work is now easier and faster but the skill needed has also evolved to a higher level consequently. 3.5 Summary This chapter is about the current application and features of measurement software and its impact on the construction industry. Due to many business processes are now almost completely computerised and the tendency is toward a greater computerisation of the remaining processes, there might be a market in the use of measurement software for QS to carry out the works such as measurement, taking-off, BQ production, etc. more efficiently and speedily. This research also found that Microsoft Office Excel 2007, CATO Suite, BinaLink, and Buildsoft are the common and popular measurement software have been used in local market. Although there are vary measurement software provided in the market and adopted in construction companies, this research found that QS appears to be one of the few professions that have not been profoundly transformed by the application of the technological advancement offered by digital revolution especially in a developing economy like Malaysia. The biggest impact of measuring software on QS practice had been on improving the speed and efficiency of professional services. Information flows in construction would increasingly be made electronically and a wide range of measurement, estimating and costing procedures also would be done through the use of software packages.

Monday, August 19, 2019

Marriott Corporation and Project Chariot Essay -- Marriott Case Analys

Marriott Corporation and Project Chariot   Ã‚  Ã‚  Ã‚  Ã‚  The Marriott Corporation (MC), had seen a long, successful reign in the hospitality industry until the late 1980s. An economic downturn and the 1990 real estate crash resulted in MC owning newly developed hotel properties with no potential buyers in sight and a mound of debt. During the late 1980s, MC had promised in their annual reports to sell off some of their hotel properties and reduce their burden of debt. However, the company made little progress toward fulfilling that promise. During 1992, MC realized that financial results were only slightly up from the previous year and their ability to raise funds in the capital market was severely limited. MC was left with little choice, as they had to consider some major changes within the company if they wished to remain a successful business. Thus, J.W. Marriott, Jr., Chairman of the board and president of MC, turned to Stephen Bollenbach, the new chief financial officer, for ideas and guidance. Bollenbach, who had a reputation for creating innovative financial structures in the hotel industry, proposed a radical restructuring for MC. Bollenbach’s proposal included breaking MC into two separate entities. The new company would retain the service businesses of MC and have the financial strength to raise capital and take advantage of various investment opportunities. On the other hand, the old company would retain the hotel properties and the pressure to sell properties at reduced prices would be greatly lessened. This drastic restructuring proposal, deemed Project Chariot, had to be evaluated by J.W. Marriott before he went before his board of directors with his ultimate recommendation. Thus, Marriott planned to review the company’s past financial history that led to their current position; evaluate Project Chariot’s advantages, disadvantages and value; determine the bond risk involved if Project Chariot was accepted and finally consider alternative recomm endations. Past History of MC By the 1980’s, the Marriot Corporation, founded in 1927, had grown into a financially sound, industry-leading corporation. Although MC went public in 1953 and continued to sell stock to the public, the Marriott family still retained the controlling interest of 25% of the company in 1992. Once J.W Marriott Sr. resigned in 1964, his son, J.W. Marriott Jr., took over the posi... ...th the restructuring proposed by Project Chariot. The Management team of HMC must aggressively restructure its finances in order to alleviate this debt and reduce its risk of bankruptcy or take-over.   Ã‚  Ã‚  Ã‚  Ã‚  Also, if possible actions should be taken to ease the worries of existing bondholders and institutional investors. Management may consider sharing the debt more equally between the two divisions in an effort to prevent downgrading of the credit rating and loss of investors. References Answers.com. Leveraged Buy Out. Retrieved July 17, 2005 from   Ã‚  Ã‚  Ã‚  Ã‚  http://www.answers.com/topic/leveraged-buyout High yield or â€Å"junk† bonds. Retrieved July 18, 2005 from http://www.finpipe.com/bndjunk.htm http://www.investopedia.com/university/mergers/mergers4.asp. Retrieved July 16, 2005. Ross, S., et. al. (2001). Corporate Finance. McGraw-Hill Companies. Yawson, A. (October 20, 2004). Performance shocks, turnaround strategies, and corporate recovery: Evidence from Australia. Retrieved July 18, 2005 from http://64.233.161.104/search?q=cache:2aoQ4Wn2y8MJ:wwwdocs.fce.unsw.edu.au/banking/workpap/wp%252010%25202004.pdf+australian+strategies+corporate+restructuring&hl=en&ie=UTF-8